







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Mesquite, NV
A walk-in shower remodel in Mesquite typically runs $6,200 to $14,500, and the price depends mostly on shower size, tile choice, whether the drain has to move, and whether we’re converting a tub. A walk-in shower is a curbless or low-curb shower you step into without lifting a leg over a tub wall – and done right, it’s fully waterproofed behind the tile so it lasts decades, not seasons. We do the whole job: tear-out, plumbing rough-in changes, waterproofing, tile, glass, and fixtures from brands like Kohler and Moen with documented specs and warranties. Call us at (844) 761-8665 and a live person will pick up, any hour. You get a written price before we touch a single tile, and every completed shower carries our 365-Day Done Right Promise – if the work fails inside that year, we come back and correct it at no charge.
This page sits under our broader Bathroom Remodeling in Mesquite service, so if your project pulls in the vanity, lighting, or floor at the same time, that’s where the full scope lives. And if you’re starting at the top and comparing contractors, our home page lays out how we run every job.
Key Takeaways
- Most Mesquite walk-in shower remodels land between $6,200 and $14,500, quoted in writing before work starts.
- Curbless and low-curb designs are the common request – they’re easier on knees and hips and read cleaner in a small bath.
- Waterproofing is the part you can’t see and the part that decides whether the shower lasts. We use a bonded sheet or liquid membrane over cement backer board, not tile on drywall.
- Every finished shower is backed by the 365-Day Done Right Promise: a full year of written coverage, free return visit if it fails.

When You Need Walk-In Showers & Shower Remodeling
The triggers are pretty consistent in this town. Here’s what usually gets a homeowner to call us:
- The tub is dead weight. A standard 30-by-60-inch alcove tub you never use eats most of the bathroom’s footprint. Pulling it and setting a walk-in shower in the same space is the most common single change we make in Mesquite, especially in the older ranches and single-level homes off Pioneer Boulevard.
- The shower is leaking somewhere behind the wall. A soft spot at the base, a stain spreading down the wall, or grout that keeps crumbling no matter how often it’s re-caulked. That’s not a cosmetic problem – it’s water reaching the substrate. A remodel that re-flashes and re-waterproofs fixes it; patching grout does not.
- Someone in the house is steering clear of the tub step. Whether it’s an aging parent, a knee replacement, or just balance that isn’t what it was, a curbless shower with a fold-down bench and a proper grab bar location, set before tile, makes daily use far easier.
- The fiberglass unit has gone chalky, cracked, or yellowed. Builder-grade shower surrounds from the 1990s are showing their age. A tile shower – porcelain or large-format – resets the whole room.
- You want one shower that works for everyone. A single generous walk-in with a handheld on a slide bar serves kids, guests, and the owners without a second fixture.
- The bathroom still has its original 1980s layout. Mesquite has plenty of homes from that era. Replacing the shower window that leaks, moving the drain, and upgrading to a niche, bench, and frameless glass is worth doing in one pass rather than three later.
Our Walk-In Showers & Shower Remodeling Process
Here’s the sequence, start to finish. Every step is documented because The Garrison Standard puts every price and every guarantee in writing before a tool comes out.
- On-site walkthrough and written scope. We measure the shower footprint, check the rough-in plumbing, and look at what’s behind the existing surround. You get a written price – line items, materials, and schedule – before any work starts. No numbers that move at the door.
- Demo and substrate inspection. Out comes the old surround, pan, and any rotted framing. If we find water damage, we show it to you and quote the repair in writing before proceeding – no surprise invoice.
- Plumbing and rough-in changes. If you’re moving the drain for a curbless design, adding a bench, or upgrading to a thermostatic valve with a Moen or Kohler trim, that happens now, before the wall closes up.
- Waterproofing. This is the step that decides the shower’s lifespan. We install a backer board rated for wet areas, then a bonded or liquid waterproofing membrane over it – corners, seams, and the curb included – and test the pan before tile. Tile set on plain drywall fails in a few years; a properly flashed shower doesn’t.
- Tile, niche, and bench. Wall tile, floor tile on a slope that drains correctly, a recessed niche or two, and a bench if the design includes one. Mosaic or smaller-format tile on the floor helps grip.
- Glass, fixtures, and close-out. Frameless glass panels and door, then the valve trim, showerhead, and slide bar. We clean the site, hand you the signed written guarantee, and walk you through what’s covered.
Most single-shower remodels run one to two weeks from demo to glass. If the scope widens into a full Bathroom Remodeling in Mesquite job – vanity, floor, lighting – we re-scope in writing, not in conversation.

Walk-In Showers & Shower Remodeling Pricing in Mesquite
These are real ranges for this market, not teaser numbers. The written price you get on-site will be specific to your shower – but here’s the ballpark so you can plan:
| Scope | Typical range |
|---|---|
| Standard alcove shower, tub removed, tile surround, prefab pan | $6,200 – $8,900 |
| Custom tile shower with cements board and membrane waterproofing, niche, bench | $9,400 – $12,800 |
| Curbless or zero-threshold with moved drain, frameless glass | $11,500 – $14,500 |
| Glass enclosure (frameless) as a standalone line item | $1,800 – $3,400 |
| Water-damaged substrate repair (if found after demo) | quoted in writing before proceeding |
What moves the number: shower size and whether the footprint changes, whether the drain has to relocate (that’s the big driver on curbless), tile material and format (large-format porcelain runs less than intricate mosaic), glass style, and the fixture line. If you’re drawn to a premium quartz cap or a specific mosaic, we work with documented name-brand materials – Silestone and Caesarstone surfaces, Kohler and Moen fixtures – so what you pick has a manufacturer spec behind it. That’s the same approach we apply on every Bathroom Remodeling in Mesquite project.
The estimate itself is free, and it’s in writing. That’s not a courtesy here – it’s the way The Garrison Standard runs, and it’s the same across our home service structure. No pressure, no countdown clocks.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower remodel cost in Mesquite?
A walk-in shower remodel in Mesquite typically costs $6,200 to $14,500 depending on design and whether the drain has to move. The most common request – a tub-to-shower conversion with tile walls and a prefab pan – lands in the $6,200 to $8,900 range. Curbless designs with relocated drains and frameless glass run higher. Call (844) 761-8665 for a free written estimate specific to your shower.
Can you fix a walk-in shower the same day?
No – a full shower remodel takes one to two weeks from demo to glass, not a same-day repair. What we can do same-day is the assessment: a technician comes out, checks the existing shower for water damage, and gives you a written scope and price. If it’s a quick leak or a failed caulk line, we’ll tell you honestly whether a repair is enough. Call (844) 761-8665 and we’ll get someone out.
Is a walk-in shower harder to maintain than a tub?
A walk-in shower is easier to clean than a tub-shower combo because there’s no high tub wall to reach over and no grout line hiding behind a tub. Tile and glass need the same routine – a squeegee after use, a mild cleaner weekly – but the surface area you’re scrubbing is smaller. The bigger long-term difference is waterproofing: a properly membrane-flashed shower doesn’t get the mold problems that come from a failing pan. Our 365-Day Done Right Promise covers the work for a full year: if a leak shows up inside that window, we come back and correct it at no charge.
Can you walk me through what “curbless” means?
Curbless means there’s no raised lip at the shower entrance – the floor runs flush from the bathroom into the shower. It requires a slightly sloped pan and, usually, a relocated drain so the water still flows correctly. That drain move is the main reason curbless costs more than a standard alcove shower. It’s worth it if knees, balance, or accessibility are a concern. Call (844) 761-8665 and we’ll walk you through whether your floor structure supports a curbless pan.
If you’re weighing the shower against a full bathroom update, our team at Bathroom Remodeling in Mesquite can scope the whole room in one written quote. Same written-price-first approach, same 365-Day Done Right Promise.
Call (844) 761-8665 for a free estimate. A live person answers, day or night. Technicians are background-checked and uniformed, and every price and guarantee is on paper before work starts.
Written by the team at Bradford Remodeling Mesquite, serving Mesquite.


