







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Mesquite Homeowners Choose Toto Construction
Bradford Remodeling Mesquite provides independent Toto repair, replacement and bathroom construction service across Mesquite, NV – we diagnose and fix the specific failure modes Toto fixtures actually develop, from Drake fill valves to Neorest control boards, and we install new Toto toilets and Washlets as part of full bathroom remodels. We’re an independent provider, not affiliated with or authorized by Toto, and we say so plainly. What sets our Toto work apart is the part itself: we fit genuine Toto valves, flush towers and Washlet components where the part defines the flush or the electronics, and we price repair honestly against replacement rather than defaulting to a new fixture. Call (844) 761-8665 and a live person answers.
Why Trust Bradford Remodeling Mesquite for Your Toto Construction?

Our technicians have up to 22 years of experience, and Toto fixtures come across their benches every week. That matters because Toto builds its own fill valves, flush towers and rim-jet geometry – a Drake’s G-Max flush does not behave like a builder-grade toilet, and a handyman who treats it that way creates problems. We know the CST743 and Drake II two-piece internals, the Ultramax II and Guinevere one-piece tanks, the skirted access on Carlyle and Vespin II, and the inlet-screen and pump layout inside Washlet and Neorest units.
Every price is written before any work starts, under The Garrison Standard, and it doesn’t move at the door. Our technicians arrive background-checked and uniformed, so you know who’s at the door before the bell rings. Every completed Toto repair and installation carries the 365-Day Done Right Promise – if the work fails inside that year, we come back and correct it at no charge. On the parts side, we use genuine Toto components where the part defines the flush or the electronics and quality aftermarket supply lines, wax rings and flanges where the brand adds nothing, so the warranty stays intact and the invoice stays honest.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Mesquite
These are the failures we actually see on Toto fixtures in Mesquite homes, not a generic list:
- Fill valve and flush tower wear on Drake and Ultramax II toilets. Phantom running, a weak flush, or water trickling into the bowl long after the tank refills. The fill valve or flush tower gasket has stopped sealing. On a ten-year-old Drake this is a part swap, not a dead toilet. In Mesquite’s hard water the valve seat also scales up, which speeds the wear.
- G-Max and Tornado flush jet clogging. Hard-water scale builds in the rim holes and trapway, so the toilet double-flushes or won’t clear in one go. Southern Nevada water runs mineral-heavy, and the scale collects where you can’t see it. Clearing the jets and trapway restores the flush.
- Wax ring and closet flange failure on original Toto installations. When the closet flange sits below tile level, the wax ring can’t seat properly and seepage shows at the base. We check the flange and wax ring whenever the bowl comes off, and correct the flange height if it’s wrong.
- Washlet and Neorest seat electronics. A pump, sensor or clogged inlet screen fails and the seat stops spraying or heating. Owners often assume the whole unit is done, when the failing component can be replaced on most models.
- Skirted-toilet install and rough-in mismatches on Carlyle and Vespin II. These toilets hide the trapway behind a smooth skirt, and the rough-in has to land right or the skirt won’t sit flush to the wall. We set the rough-in correctly during a remodel rather than fighting it after the tile is down.
Toto Parts & Our Repair-vs-Replace Approach

We source the part the job needs and don’t claim to keep stock on hand. For Toto, that means genuine Toto fill valves, flush towers, seats and Washlet components where the part defines the flush or the electronics, and quality aftermarket supply lines, wax rings and flanges where the brand adds nothing to performance. We price repair against replacement honestly. A Toto toilet is built to be rebuilt – a 15-year-old Drake with a worn valve is a repair, not a replacement. A cracked bowl or a dead Neorest control board is where we price a new fixture against the repair and let you decide.
To picture how this usually goes: a Drake that’s been in service a decade starts running for a few seconds every half hour, and the owner figures the toilet is dying. The culprit is normally a tired fill valve or a flush tower gasket that no longer seals, plus scale in the rim jets. A qualified pro shuts the supply, fits the correct Toto-fit valve or tower, clears the jet holes, and checks the flange and wax ring while the bowl is off. The fixture flushes like new for a fraction of replacement cost. Call (844) 761-8665 for a written estimate.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We test the actual failure – fill valve, flush tower, rim jets, flange, or Washlet electronics – and confirm the model and series so the right part gets ordered. You get a written price before any work starts.
- 2
Repair or installation. We fit genuine Toto components where the flush or electronics depend on them, set the rough-in and flange height correctly, and install new Toto toilets or Washlets as part of a bathroom remodel or a straight fixture swap.
- 3
Test. We cycle the flush, check for phantom running and trickle into the bowl, verify the Washlet spray and heat, and confirm no seepage at the base.
- 4
Warranty. You get the 365-Day Done Right Promise in writing – if the repair or install fails within that year, we return and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Mesquite
We service and install across the Toto line Mesquite owners actually own: Drake (CST743) and Drake II two-piece toilets; Ultramax II and Guinevere one-piece toilets; Carlyle and Vespin II skirted toilets; and Washlet and Neorest bidet seats and integrated toilets. Whether it’s a single fill-valve swap on an older Guinevere or a full new-install of a Neorest as part of a bathroom remodel, the diagnose-repair-test-warranty process is the same. We handle supply-line, flange and wax-ring work alongside the fixture so the install is squared away from the floor up.
We Also Service These Brands
Toto is one line we work on, not the only one. Bradford Remodeling Mesquite also services and installs KraftMaid cabinetry, Kohler and Moen fixtures, and Cambria and Silestone surfaces as part of full bathroom and kitchen work, among other documented brands. That means one crew can handle the Toto fixture and the surrounding remodel without handing you off.
FAQs – Toto Construction Service in Mesquite

Is Bradford Remodeling Mesquite authorized by Toto?
No. We’re an independent Toto service provider, not affiliated with, authorized by, or endorsed by Toto. We work on Toto fixtures and use genuine Toto parts where they matter, but the manufacturer doesn’t sponsor or certify us. Call (844) 761-8665 for a written estimate.
Do you use genuine Toto/OEM parts?
Yes, where the part defines the flush or the electronics – fill valves, flush towers, seats and Washlet components. For supply lines, wax rings and flanges we use quality aftermarket parts, since the brand doesn’t change how they perform. We tell you which part goes in and why before work starts.
How long does Toto service take?
A fill-valve or flush-tower swap is typically a short visit, often done in one trip; a Washlet electronics diagnosis or a skirted-toilet install during a remodel takes longer and gets scheduled into the project. Your written price and timeline are set before work begins.
What Toto models/series do you cover?
Drake (CST743) and Drake II, Ultramax II, Guinevere, Carlyle and Vespin II toilets, plus Washlet and Neorest bidet seats and integrated toilets. If you’re unsure which model you have, the tank or bowl usually carries the model number and we can confirm it.
Will service void my Toto warranty?
Proper service with genuine Toto components where the flush or electronics depend on them keeps the warranty intact; the wrong part or a botched install is what puts it at risk. We fit Toto parts in those spots and explain the parts choice so nothing about the repair undercuts your coverage.
How much does Toto construction cost in Mesquite?
Toto work is usually priced within a bathroom remodel or a targeted fixture repair, and the surrounding build drives the range. Here are the market ranges we work from:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (844) 761-8665 for an exact quote on your Toto job – estimates are free and the price is written before any work starts.
Book Your Toto Service in Mesquite, NV
Whether it’s a Drake that keeps running, a Washlet that stopped spraying, or a new Toto toilet and walk-in shower going into a Mesquite bathroom remodel, we give you a written price before work starts and back the finished job with the 365-Day Done Right Promise. Call (844) 761-8665 to schedule your free estimate.
Written by the team at Bradford Remodeling Mesquite.












